Disable User Account Control (UAC) in Windows. Enable or disable UAC in Windows User Account Control windows 7

User Account Control (UAC) - a component (first appeared in Windows Vista) that asks for confirmation of actions that require administrator rights, is used to protect against unauthorized use of a computer.

All after installing Windows7 at startup, installing programs encountered a pop-up window asking permission to make changes to the computer - and this annoys many, in this article I want to describe step by step how to disable the annoying pop-up window.


First of all, I will say that turning off User Account Control (UAC) you reduce the level of computer protection against various threats, therefore, think several times whether it is worth doing it. It is described at the end of the article. If you are determined to disable, I suggest considering several options for how to do this.

1 way to disable User Account Control (UAC)

Click "Start" in line Find programs and files write the word UAC, Press "User Account Control Settings Changes."

In the window that opens, lower the slider to the very bottom and click "OK".

This way you will disable pop-up annoying windows.

2 way to disable User Account Control (UAC).

Go to the Control Panel, to do this, click "Start - Control Panel"

Select "Small Icons" and click on "User accounts".


After that click "User Account Control Settings Changes".

In the window that opens, lower the slider and click "OK".

UAC is disabled.

Table depending on the choice of parameter and its impact on computer security.

Parameter	Impact on safety
Always notify	This is the most secure setting. When a notification is displayed, before allowing or denying changes, you must carefully review the contents of the dialog box.
Notify me only when programs try to make changes to my computer	In most cases, you can allow Windows settings to be changed without notice, as this will not result in a noticeable decrease in security. However, commands and data can be passed to some programs that are included with Windows. Malicious programs can use such software to install files and change computer settings. Therefore, you should always be careful about which programs you can allow to run on your computer.
Notify only when programs try to make changes to the computer (don't dim the desktop)	This setting is similar to Notify me only when programs try to make changes to my computer, but it does not display notifications on the secure desktop. Because the User Account Control dialog box is not present on the secure desktop when this setting is used, some programs may interact with user account control interface elements. If a malicious program is already running on the computer, the level of security in this case is practically not reduced.
Never notify	This is the least secure setting. Disabling User Account Control puts your computer at risk. In this case, you should be careful about the programs you run, as they are granted access permissions similar to yours on the computer, including permissions to read and modify protected system partitions, personal data, saved files, and any other data stored on the computer. In addition, such programs will be able to exchange data with any device connected to the computer (including via the Internet).

In some cases, a PC user may need to disable a particular user account. Please note that disabling an account is a disabling, not her. Today I will show you how to do it right.

First way

First of all, we need to get into the control panel. To do this, click on the "Start" button and select the item of the same name.

The second option is to press the WIN + R keys on the keyboard, a window will appear in which you need to write a word control and click OK.

The control panel is running. Here we find the item "Administration" and click on it.

In the new window, we see several different items, but we are only interested in one - "Computer Management". We go into it.

In the "Computer Management" window, click "Local Users and Groups", then - "Users" and select the user by double-clicking on it with the left mouse button.

The user properties window opens. To disable an account, check the box next to "Disable Account" and click OK.

Second way

The second method allows you to disable the account using the command line. For this you need to open . Click the "Start" button, in the line "Search programs and files" write the word cmd. A command line shortcut will appear at the top of the window. Right-click on it and select "Run as administrator".

The command line is running. Now we need to add the command net user Username /Active:no, where you specify the account name as the username, for example, net user Administrator /Active:no. After that, press the Enter key.

Be careful. When disabling multiple accounts, you yourself may not be able to get into your own account if you accidentally disable it.

In order to answer the question of how to enable or disable User Account Control in Windows, you need to understand what it is. UAC is an operating system security feature supported by all recent versions of Windows (Vista, 7, 8, 10). Regardless of which account the user is using, the system prompts the application to allow the application to make changes.

The procedure for enabling and disabling UAC in Windows 10 is different.

If the owner of the PC is an Administrator, then he can allow or not this program to enter the OS and change the settings by simply clicking the "Yes" or "No" buttons. Otherwise, you will need to enter a password. The reasons for disabling credential control can vary, but sometimes it's really necessary.

When an application is loaded, the OS 10 notification window that appears contains information about the name of the program, its publisher, and the source of the file. All this gives a complete picture of the software being launched. Therefore, when the application does not have a name, users should have a question about its "integrity". Thus, along with the installation file, viruses often penetrate. If the program is checked or you rely on antivirus, in any case, it is possible to disable protection.

IMPORTANT. UAC is enabled by default in Windows 10. After turning it off, you can always turn it back on.

Disabling the control function

Method 1.

To trigger a control notification in Windows 10, you can try downloading the installation file of any simple program, such as Media Player. To do this, users must have write access as Administrator. In the lower right corner of the message that appears, click on "Configure the issuance of such notifications." Edit the function to your liking.

Method 2.

Method 3.

In the "Start" menu, find the "Control Panel" tab. In the right part of the window, open the "small icons" and select the line "User Accounts". Then click on "Change User Account Control Settings". Also, configure the operation of the option or disable it altogether.

Method 4.

Type Win + R on the keyboard. In the console that opens, write "UserAccountControlSetting" and enter. In the options that appear, disable the option.

Method 5.

Click on the Win + R keys. In the "Run" window, enter the word "regedit" and "ok". On the left side of the registry editor, find "System". In the right console that opens, double-click on the inscription "EnableLUA". In the window that appears, change the value of "1" to "0" and "ok". You will be prompted to restart your computer to save the changes.

In order to enable control protection in Windows 10, in its settings, return the selector to its original position. You can also customize the function to suit your parameters, where the second position of the selector from the top can be considered the best option.

What do the 4 provisions of the UAC mean?

1. Always notify is the safest and best option. That is, any unauthorized action of the program will cause the appearance of a notification window.
2. Notify me when the app tries to make changes (default). It usually turns on when the program is loaded.
3. Notify when changes are made without dimming or locking the screen. This provision does not prevent Trojans from invading.
4. Do not notify ever, that is, the complete disabling of the function.

If, nevertheless, it was decided to disable the protective option in Windows 10, you should be prepared for malware attacks. In this case, you need to be especially attentive to the launched applications, since they have the same access to information on the computer as users with Administrator rights. Therefore, if you disabled UAC just so that it does not interfere, then this is a very wrong tactic. In this case, it is better to set the default protection function.

User Account Control (UAC for short) is a security feature that helps prevent unauthorized changes to your PC that may be caused by software, viruses, or other users. UAC ensures that changes are made with administrator permission. At the same time, the execution of the program stops, and a confirmation window pops up. Over time, this becomes somewhat annoying, so the lesson is devoted to how to disable user account control in windows 7.

Note: Disabling UAC will lower the security level of the system. Strictly make sure that running the application does not harm your PC.

It is possible to remove the annoying component window using 4 methods:

1. Through the Account Control Levels window
2. Using Group Policy
3. Using the registry
4. Using the command line

In addition to the described algorithm of actions, you can download ready-made options that disable user account control in a couple of mouse clicks. Already ready to get rid of constantly popping up messages, then let's start.

Disabling through the User Account Settings window

The launch shortcut for User Account Control Options is located in the System32 folder and is named UserAccountControlSettings.exe. With it, you can disable uac in windows 7 by moving the slider with the mouse. Take these steps:

3. In the left part of the open window, move the slider up to 4 points (shown in the image) and click OK. This will disable User Account Control and annoying Windows 7 warnings.

4. Don't expect results right away. The changes will be applied after the next start or reboot of the PC.

Disabling UAC via Group Policy

This method is only suitable for editions of Windows 7:

1. professional
2. Maximum
3. Corporate

Other editions are deprived changing UAC options through the local group policy component, due to its limited capabilities. If you own them, skip this instruction, otherwise read on.

1. Launch the Local Group Policy interface. Press Win (Logo button) + R, in the form that opens, enter secpol.msc and hit enter.

2. If a UAC prompt appears, click yes. In the window, click on the arrow next to the “local policies” section, then select the “security settings” subsection. A list of policies will be built on the right. Find the “user account control” item, where it says “all admins work in admin approval mode” through a colon (see picture). Double click on it with the mouse.

3. In the properties of the option, select the "disabled" item. Click "apply" then OK. Close all windows and restart your computer.

Remove warnings using the registry

To disable User Account Control in Windows 7, follow the steps in sequence and do not change other settings.

1. . Click on , type regedit.exe into the search box and press enter.

2. Get to the System subsection (full path in the screenshot). In the right pane find the option EnableLUA, double click on it.

3. Set the value to 0, which disables UAC. Accordingly, 1 on the contrary includes. Click OK. Restart the system.

There is also a ready-made version. Download the archive and extract it. The archive contains 4 REG files responsible for user account control levels.

1. Uroven-1.reg
2. Uroven-2.reg
3. Uroven-3.reg
4. Uroven-4.reg - UAC disable file

Right-click on the 4 REG file, select "merge" from the menu. Confirm the action by pressing 2 times "yes". Then restart Windows 7.

Disable user account control via cmd

To get started, find out. When you decide on the opening method, . I suggest copying the following code into it and pressing enter to disable UAC in Windows 7:

%windir%\System32\cmd.exe /k %windir%\System32\reg.exe ADD HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f

You can immediately or through the "start". Then check the result.

The article suggested disable User Account Control in Windows 7 different methods. A complete shutdown will undermine the security of the PC as a whole. If you decide to sacrifice security, then install and maintain an up-to-date anti-virus database. A number of programs require UAC to be running, for example, in Windows 8, User Account Control must be enabled. For maximum protection, do not disable this option.

Hello! Today I decided to write another tip in which I will talk about how how to disable User Account Control (UAC) in Windows 7. After that, what do you do first? Yes, I also install different programs :). And you probably also noticed a warning that looks like this:

What is it and what does it give? Is it User Account Control, or UAC. It serves to prevent third-party programs from making changes to your computer, or more correctly, dangerous programs. By default, the UAC system is enabled, and every time you try to start the installation of a program, a window with a question will appear. Do you allow this program to make changes to your computer.

If you click yes, the installation of the program will begin, but if not, then nothing will happen and the program will not be installed. Personally, I find such a check useless, and it only distracts all the time with its warnings. That's why I always disable UAC.

How to disable UAC?

To disable this check, the campaign needs to log in as an administrator. We go to "Start", "Control Panel".

We are looking for an item and select it.

Choose .

A window will open in which you need to drag the pointer to the very bottom, to “Never notify”. After that click “Ok”.

A message will appear stating that you are allowed to make changes to your computer. We press "Yes". After that, the Action Center will inform you that in order to disable User Account Control, you need to restart your computer.

After the reboot, messages from User Account Control will not appear. You can enable UAC in the same way, just move the slider to "Default".